ball detent torque limiter for equipments,power transmission parts,power drive
May 14, 2009 | tags ball detent torque limiter | views
Comments 1
TGX Series torque limiter
Ball-type torque limiter is a built-precision ball body, once overload, active and passive lateral separation between, excellent rigidity, very suitable for high-precision location, has the following characteristics:
Separation of action is accurate, very high precision, when the separation is almost idle, even in the repeated separation of action for the work of separation of torque under its accuracy can be maintained at less than ± 3%;
No drive space, because of its innovative structure of the steel ball with the wedge (PAT), there is almost no gap transmission;
Link function, for the joint shaft, the ball with the wedge-shaped structure can be generated during the installation process to absorb the angular displacement, parallel displacement and axial displacement;
Only the location of reset function to ensure that the overload position after position degrees degrees or duplicate;
Simple and easy to transfer torque and easy to read, simply rotating the adjustment nut can be fixed easily torn off and the adjustment torque and angle of rotation of the indicator can easily help the proofing torque value settings;
Equipped with a standard load detection sensor, AC or DC through the use of the TG sensor overload torque can be AC or DC output signal, can be used to activate alarm devices (such as bells, lights), can also be used in an instant turn off driving machine
Ball-type torque limiter is a built-precision ball body, once overload, active and passive lateral separation between, excellent rigidity, very suitable for high-precision location, has the following characteristics:
Separation of action is accurate, very high precision, when the separation is almost idle, even in the repeated separation of action for the work of separation of torque under its accuracy can be maintained at less than ± 3%;
No drive space, because of its innovative structure of the steel ball with the wedge (PAT), there is almost no gap transmission;
Link function, for the joint shaft, the ball with the wedge-shaped structure can be generated during the installation process to absorb the angular displacement, parallel displacement and axial displacement;
Only the location of reset function to ensure that the overload position after position degrees degrees or duplicate;
Simple and easy to transfer torque and easy to read, simply rotating the adjustment nut can be fixed easily torn off and the adjustment torque and angle of rotation of the indicator can easily help the proofing torque value settings;
Equipped with a standard load detection sensor, AC or DC through the use of the TG sensor overload torque can be AC or DC output signal, can be used to activate alarm devices (such as bells, lights), can also be used in an instant turn off driving machine
